AU not recognized by loader

Hi there,

I’ve copied the UDEV rules and ran the loader CLI under tools with ‘./loader -l’ and got:

Devices: 0: Alchitry Au 1: Unknown

lookig at dmesg it shows:

[ 941.440081] usb 2-2: new high-speed USB device number 3 using xhci_hcd [ 941.584769] usb 2-2: New USB device found, idVendor=0403, idProduct=6010, bcdDevice= 7.00 [ 941.584778] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 941.584783] usb 2-2: Product: Alchitry Au [ 941.584787] usb 2-2: Manufacturer: Alchitry [ 941.584791] usb 2-2: SerialNumber: FT3KRFFN [ 941.589612] ftdi_sio 2-2:1.0: FTDI USB Serial Device converter detected [ 941.589682] usb 2-2: Detected FT2232H [ 941.590058] usb 2-2: FTDI USB Serial Device converter now attached to ttyUSB0 [ 941.591543] ftdi_sio 2-2:1.1: FTDI USB Serial Device converter detected [ 941.591566] usb 2-2: Detected FT2232H [ 941.591689] usb 2-2: FTDI USB Serial Device converter now attached to ttyUSB1 [ 941.605973] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [ 941.606000] ftdi_sio 2-2:1.0: device disconnected [ 941.608693] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1 [ 941.608711] ftdi_sio 2-2:1.1: device disconnected

What am I missing? And how can I find any missconfiguration?

Thanks for your time and best regards,
befedo
[hr]
Could be ignored …

I’ve got lost somewhere between reloading UDEV rules and reading carefully the output of the loader CLI.

:smiley: