Alchitry Au board interfacing issue

[Kesar_sheth]

@Alchitry

Are you connecting the Xilinx cable to the JTAG pins on the header or trying something else?

The easiest way to use JTAG is with the on-board JTAG bridge. You can program the V1 boards with the “Program_ftdi” program included with Vivado. It will then show up in the hardware manager. See No Devices Detected with Vivado Hardware Manager - #5 by Alchitry

As per your suggestion I implement the “Program_ftdi” but still I am facing same issue.
I read this topic and followed all the steps but, hardware target on local server still not exists, No Devices Detected with Vivado Hardware Manager - #5 by alchitry.
I tried multiple times and reinstalled the Xilinx USB cable driver manually, but didn’t get any solution.
I updated the Xilinx Vivado tool 2024.2 >>> 2024.2.1
here I also attached the file for your reference.
Could you please guide me how can I solve these errors.
Let me know if you need anything else.