• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Problems connecting to Mojo from Ubuntu 16.04
#1
I'm having problems connecting to my mojo board from the usb connection on my Ubuntu 16.04 system running on a Dell XPS.  I can connect the cable to the laptop and board and the lights turn on the board, but I cannot create a connection.  I never get a /dev/ttyUSB0 or /dev/ttyACM0 device - in fact no new devices show up.  ls /dev/tty* shows nothing with USB or ACM in it.  lsusb looks like this:
Code:
Bus 004 Device 003: ID 0bda:8153 Realtek Semiconductor Corp. 
Bus 004 Device 002: ID 0424:5537 Standard Microsystems Corp. 
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 0e8d:1887 MediaTek Inc. 
Bus 003 Device 003: ID 0bda:4014 Realtek Semiconductor Corp. 
Bus 003 Device 002: ID 0424:2137 Standard Microsystems Corp. 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0c45:670c Microdia 
Bus 001 Device 004: ID 04f3:20d0 Elan Microelectronics Corp. 
Bus 001 Device 003: ID 0cf3:e301 Atheros Communications, Inc. 
Bus 001 Device 002: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

dmesg | grep tty produces this:


Code:
[    0.000000] console [tty0] enabled

and nothing else.

There is nothing in /etc/var/syslog (except me registering the cdc-acm driver below)

I have followed the instructions here: https://alchitry.com/pages/mojo-loader - especially the ones regarding being in the dialout group and having the 99-mojo.rules installed in /etc/udev/rules.d.

I have rmmod & modprobe the cdc-acm module, but this did not change anything.

I'll take any ideas you can give me.

Thanks.
  Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)