Alchitry Forums
Alchitry-Cu first tutorial not work! - Printable Version

+- Alchitry Forums (https://forum.alchitry.com)
+-- Forum: Alchitry (https://forum.alchitry.com/forum-1.html)
+--- Forum: General Questions (https://forum.alchitry.com/forum-2.html)
+--- Thread: Alchitry-Cu first tutorial not work! (/thread-321.html)



Alchitry-Cu first tutorial not work! - wing - 03-21-2021

I follow the tutorial  https://alchitry.com/blogs/tutorials/your-first-fpga-project
to test on my Cu board
and 
1. Windows 10
2. Alchitry Labs version 1.2.5
3. iCEcube2 version 2017.08

but it give the following error

Staring iceCube2...
Bin file (D:\workspace_alchitry\LEDtoButton\work\alchitry_imp\sbt\outputs\bitmap\cu_top_0_bitmap.bin) could not be found! The build probably failed.

Any suggestions ?

Thanks


RE: Alchitry-Cu first tutorial not work! - wing - 03-24-2021

Hi,
  Anyone have the same experience?
or you have no any difficulties about using the Cu board ?
or  you have no problem if using Linux version ?

I think I will try
1. Install the Alchitry Lab under Ubuntu 18.04 to try again
2. on widows, but try the open source iceStorm instead of iceCube2

Wing


RE: Alchitry-Cu first tutorial not work! - wing - 03-25-2021

OK, finally, I make it work on Ubuntu18.04, but not that straight forward. anyway, it work now.